The Armory - Guns, Knives, and Axes

User avatar
Hastur
Posts: 5297
Joined: Wed Nov 30, 2016 2:43 am
Location: suiþiuþu

Re: The Armory - Guns, Knives, and Axes

Post by Hastur » Fri Aug 03, 2018 12:41 am

Or build your own from an old oil drum.

https://www.fix.com/blog/building-an-ugly-drum-smoker/

Image
Image

An nescis, mi fili, quantilla prudentia mundus regatur? - Axel Oxenstierna

Nie lügen die Menschen so viel wie nach einer Jagd, während eines Krieges oder vor Wahlen. - Otto von Bismarck

User avatar
The Conservative
Posts: 14719
Joined: Wed Nov 30, 2016 9:43 am

Re: The Armory - Guns, Knives, and Axes

Post by The Conservative » Fri Aug 03, 2018 5:54 am

Speaker to Animals wrote:
Thu Aug 02, 2018 11:18 pm
This is genius:
“The Framers were clear: If they meant citizens, they would have said citizens. But they didn’t,” his defense lawyer, Samuel Jacobson, argued in Brooklyn federal court. “There is no suggestion that there was a concept of ‘illegal alien’ and no suggestion that if you were from a foreign country, you couldn’t bear arms.”

Brooklyn federal prosecutors are furious the case has been allowed to move forward. They argue that Perez has zero Second Amendment rights because he came to the U.S. illegally.

“Those who don’t have legal status here have an interest in defying law enforcement. They have an interest in not maintaining a stable residence or registering a firearm,” [Assistant U.S. Attorney Tanya Hajjar] argued in court
https://www.breitbart.com/big-governmen ... nt-rights/

Shitlibs are backed into a corner with this one.
This is also a slippery slope too... if you read between the lines he is also making an excuse that there is no such thing as illegal aliens. So Immigration laws may become superfluous. If the liberals wish to make a case for it based off of this potential ruling.
#NotOneRedCent

User avatar
C-Mag
Posts: 28096
Joined: Tue Nov 29, 2016 10:48 pm

Re: The Armory - Guns, Knives, and Axes

Post by C-Mag » Fri Aug 03, 2018 8:58 am

Hastur wrote:
Fri Aug 03, 2018 12:41 am
Or build your own from an old oil drum.

https://www.fix.com/blog/building-an-ugly-drum-smoker/
I built an oil drum wood stove, pretty much the same thing, and if you are going to try this. Definitely think about putting in a door. It's super easy. The way I did mine, was I layed out my rectangle and my hinges. Then I used an angle grinder with a cut off wheel and cut along my line where the hinges went first. Then I drilled and installed hinges. Then cut out the rest of the door which was already attached to the hinges. Added a simple latch mechanism and it was done.
PLATA O PLOMO


Image


Don't fear authority, Fear Obedience

User avatar
The Conservative
Posts: 14719
Joined: Wed Nov 30, 2016 9:43 am

Re: The Armory - Guns, Knives, and Axes

Post by The Conservative » Fri Aug 03, 2018 10:25 am

Just remember, the one I paid for and the one that you’d have to make are close to the same costs. A 50 gallon SS drum that hasn’t had contamination in it of any sort is between $50 to $120 before anything else.
#NotOneRedCent

User avatar
Haumana
Posts: 4027
Joined: Wed Nov 30, 2016 9:48 am

Re: The Armory - Guns, Knives, and Axes

Post by Haumana » Fri Aug 03, 2018 11:05 am

Got mine for $25. It used to hold corn syrup. I had to burn off the vinyl protective coating inside but that was pretty easy. It produced some rocking BBQ.

Image

Image


This is my first one I made out of clay pottery and a hot pad.

Image


Image

Okeefenokee
Posts: 12950
Joined: Wed Nov 30, 2016 10:27 pm
Location: The Great Place

Re: The Armory - Guns, Knives, and Axes

Post by Okeefenokee » Fri Aug 03, 2018 11:08 am

I guess we all have to make smokers now.
GrumpyCatFace wrote:Dumb slut partied too hard and woke up in a weird house. Ran out the door, weeping for her failed life choices, concerned townsfolk notes her appearance and alerted the fuzz.

viewtopic.php?p=60751#p60751

User avatar
C-Mag
Posts: 28096
Joined: Tue Nov 29, 2016 10:48 pm

Re: The Armory - Guns, Knives, and Axes

Post by C-Mag » Sat Aug 04, 2018 12:02 pm

Nice work on the smokers

I picked up one of these at a church garage sale. $3, retails for $30
Image


Lot's a good knives at garage sales, though 95% of them are junk
PLATA O PLOMO


Image


Don't fear authority, Fear Obedience

User avatar
The Conservative
Posts: 14719
Joined: Wed Nov 30, 2016 9:43 am

Re: The Armory - Guns, Knives, and Axes

Post by The Conservative » Sat Aug 04, 2018 2:44 pm

C-Mag wrote:
Sat Aug 04, 2018 12:02 pm
Nice work on the smokers

I picked up one of these at a church garage sale. $3, retails for $30
Image


Lot's a good knives at garage sales, though 95% of them are junk
But when you find them, they are worth every penny.
#NotOneRedCent

User avatar
Fife
Posts: 15157
Joined: Wed Nov 30, 2016 9:47 am

Re: The Armory - Guns, Knives, and Axes

Post by Fife » Sat Aug 04, 2018 3:02 pm

C-Mag wrote:
Sat Aug 04, 2018 12:02 pm
Nice work on the smokers

I picked up one of these at a church garage sale. $3, retails for $30
Image


Lot's a good knives at garage sales, though 95% of them are junk
Did you get a <2005 Schrade USA knife or a >2005 Chink? Makes a wee bit of difference; I'm hoping for the best.

User avatar
C-Mag
Posts: 28096
Joined: Tue Nov 29, 2016 10:48 pm

Re: The Armory - Guns, Knives, and Axes

Post by C-Mag » Sat Aug 04, 2018 3:25 pm

Fife wrote:
Sat Aug 04, 2018 3:02 pm

Did you get a <2005 Schrade USA knife or a >2005 Chink? Makes a wee bit of difference; I'm hoping for the best.
Yes, definitely gotta get em pre Walmart sell out.
it's probably an early 90's special edition. Has a white handle, which I hadn't seen before, in the original display box.


Never skinned an animal, that will change.
PLATA O PLOMO


Image


Don't fear authority, Fear Obedience